NB2309AC1HDTR2G Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. The 16-TSSOP (0.173, 4.40mm Width) package includes this clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. As a result of this, we can find 16 terminations. For this clock generator ic, a voltage of 3.3V is required. There is a Clock PLL called Clock which is designed to be the input to this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An up to 133.33MHz frequency is provided by this clock-based RF synthesizer. PLL clock is mounted in the way of Surface Mount. This clock generator would require a maximum supply voltage of 3.6V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. This clock PLL works with a supply voltage of 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. This electronic component can be classified as a Zero Delay Buffer. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. This part number NB2309A is related to the following electrical components. A 16 pin is available on the clock PLL. The supply voltage should be maintained at 3.3V for high efficiency. The timing skew of this frequency synthesizer is low at 0.25 nsmax. This digital clock generator is configured with 8 high true output enable pins.
NB2309AC1HDTR2G Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
NB2309AC1HDTR2G Applications
There are a lot of ON Semiconductor NB2309AC1HDTR2G Clock Generators applications.
- Digital switching systems
- Small signal recovery
- Clock synchronization
- FMCW Radar
- Telecommunication systems
- Microwave radio
- Automatic control
- Sampling clocks for ADC and DAC
- Skew suppression
- Frequency shifting decodes
