NB2309AC1HDTG Overview
As a clock IC, it uses the Tube package. There is a clock generator embedded in the 16-TSSOP (0.173, 4.40mm Width) package. This clock generator will sustain a maximum temperature of 260 when reflown. In it, there are 16 terminations to be found. The clock generator ic should be grounded with a voltage of 3.3V. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. 133.33MHz is the maximal value for normal operation. This component can be conveniently installed on the panel thanks to the Surface Mount. This clock generator would require a maximum supply voltage of 3.6V. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. As long as you provide 3V~3.6V supply voltage, it will work. The temperature should be set at 0°C~70°C to ensure reliable performance. As far as this electronic part is concerned, it can be classified as a Zero Delay Buffer component. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. These related electrical parts are available for the base part number NB2309A. The clock PLL has 16 pins that are available. RF synthesizers can handle voltages up to 3.3V. The maximal same edge skew (tskwd) can not be exceeded. The clock generator is configured with 8 pins for enabling true outputs.
NB2309AC1HDTG Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
NB2309AC1HDTG Applications
There are a lot of ON Semiconductor NB2309AC1HDTG Clock Generators applications.
- 1 Gigabit Ethernet
- Phase modulation cellular systems
- CPUs
- Time to digital converters
- Medical equipment
- Signal modulation and demodulation
- Ports
- Local oscillators (LOs)
- Frequency synthesis
- Coherent carrier tracking
