NB2308AC1DG Overview
The Tube method is used for packaging clock ICs. Clock PLL is embedded in the 16-SOIC (0.154, 3.90mm Width) package. In it, there are 16 terminations to be found. The supply voltage of 3.3V allows for high efficiency. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. There are 1 circuits implemented in order to achieve full performance from this electronic part. 133.3MHz is the maximal value for normal operation. With the Surface Mount, it is easy to install this electric component on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageIn order to maintain safety, this frequency generator should be supplied with voltages above 3V. As long as you provide 3V~3.6V supply voltage, it will work. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. It is possible to classify this electronic component as a Zero Delay Buffer. Clock PLL is equipped with 16 pin count. This part number NB2308A is related to the following electrical components. There are 16 pins on the frequency generator that are available for use. The maximum supply voltage that analog clock generator can handle is 3.3V. The maximal same edge skew (tskwd) can not be exceeded. This digital clock generator is configured with 8 high true output enable pins.
NB2308AC1DG Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
NB2308AC1DG Applications
There are a lot of ON Semiconductor NB2308AC1DG Clock Generators applications.
- Signal generator
- Ports
- Main oscillator in receiver
- Signal demodulation
- PCI express cards
- Simple clock clean-up circuits
- Digital circuits
- Wide area power system
- Frequency synthesis
- Walkie-talkies
