NB2308AC1D Overview
Clock ICs are packaged using the Tube method. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. This clock generator ic can sustain a maximum temperature of 240 during reflowing. As a result, frequency synthesizers can be found to contain 16 terminations. To operate this time clock generator, 3.3V voltage should be applied. The input of this clock generator is designed to be Clock. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 133.3MHz maximum. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage this clock generator would take is 3.6V. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. As far as this electronic part is concerned, it can be classified as a Zero Delay Buffer component. The clock-generating IC is a 16-bit device designed specifically for microprocessors. The related electronic parts of part number NB2308A are listed below. There is a 16 pin that is available on the frequency synthesizers. In terms of the supply voltage, PLL clock can handle 3.3V volts. As a result of this digital clock generator, there is a low timing skew at 0.2 ns max. There are 8 true outputs.
NB2308AC1D Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
NB2308AC1D Applications
There are a lot of ON Semiconductor NB2308AC1D Clock Generators applications.
- Wireless handsets
- Signal demodulation
- Infotainment systems
- Pulsed digital systems
- High-speed optical transport network (OTN)
- Simple clock clean-up circuits
- Melting
- Sampling clocks for ADC and DAC
- CPUs
- Multiplexing communication
