NB2305AI1D Overview
Tube-method packaging is used for clock ICs. As part of the 8-SOIC (0.154, 3.90mm Width) package, this clock generator is embedded. Frequency generator is capable of operating at a maximum temperature of 240 when reflowing. There are 8 terminations found in the file. This clock generator ic should receive a voltage of 3.3V. There is a Clock PLL called CMOS which is designed to be the input to this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. A clock-based RF synthesizer that provides a max frequency of 133MHz is available. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. The supply voltage (Vsup) should be kept above 3V for normal operation. There should be 3V~3.6V provided with this RF synthesizer. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. This is an electronic part that can be classified as a Zero Delay Buffer in this case. Clock PLL is equipped with 8 pin count. According to the base part number NB2305A, its related parts can be found. Clock generator is designed with 8 pins. The supply voltage should be maintained at 3.3V for high efficiency. This clock generator can be classified as a kind of Clock Drivers in general. As a result of this digital clock generator, there is a low timing skew at 0.25 ns max. The digital clock generator has 4 high-enable output pins.
NB2305AI1D Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs
NB2305AI1D Applications
There are a lot of ON Semiconductor NB2305AI1D Clock Generators applications.
- Threshold extension
- Instrument
- Digital switching systems
- Modems
- GPS systems
- Deep space exploration
- Space communucation
- Small signal recovery
- Bit synchronization
- Bluetooth receivers
