NB2305AC1HD Overview
Tube-method packaging is used for clock ICs. 8-SOIC (0.154, 3.90mm Width) contains this Clock PLL. This clock generator ic can sustain 240 degrees of temperature during reflowing. As a result of this, we can find 8 terminations. For this clock generator ic, a voltage of 3.3V is required. In this clock generator, Clock is used as the input to the clock. 1 circuits are implemented to access the electronic component's full performance. The frequency generator has a maximum frequency of 133.33MHz. PLL clock is mounted in the way of Surface Mount. Clock generators can take up to 3.6V of power as a maximum supply voltageKeeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. Clock generator ic works with 3V~3.6V. Based on test statistics, ambient temperature should be set at 0°C~70°C. This electronic component can be classified as a Zero Delay Buffer. Microprocessors are specifically designed to use this clock-generating IC, which has a 8-bit output. According to the base part number NB2305A, its related parts can be found. A 8 pin is available on the PLL. In terms of the supply voltage, analog clock generator can handle 3.3V volts. This clock generator offers low timing skew at 0.25 ns Max. The digital clock generator has 4 high-enable output pins.
NB2305AC1HD Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs
NB2305AC1HD Applications
There are a lot of ON Semiconductor NB2305AC1HD Clock Generators applications.
- Signal demodulation
- Microwave backhaul IF
- Clock signals to the high-speed Digital RF circuits
- Ports
- Mixed mode (analog and digital) applications
- CB radios
- FMCW Radar
- Carrier synchronization in wired communication
- Quenching?
- Bit synchronization
