NB2305AC1D Overview
The Tube method is used for packaging clock ICs. This clock generator is embedded in the 8-SOIC (0.154, 3.90mm Width) package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 240. 8 terminations can be found in frequency generators. This electronic frequency generator requires a voltage of 3.3V. Clock is designed as this clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 133.33MHz Max can be achieved with this clock-based frequency synthesizer. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageFor safety reasons, this frequency synthesizer should have a voltage supply above 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Based on test statistics, ambient temperature should be set at 0°C~70°C. This electronic component can be classified as a Zero Delay Buffer. Clock PLL is equipped with 8 pin count. The related electronic parts of part number NB2305A are listed below. There is an available 8 pin on the clock generators. RF synthesizers can handle a voltage of 3.3V as the supply voltage. The maximal same edge skew (tskwd) can not be exceeded. 4 pins are configured for high true output enable in this clock generator.
NB2305AC1D Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs
NB2305AC1D Applications
There are a lot of ON Semiconductor NB2305AC1D Clock Generators applications.
- Microwave radio
- Automatic control
- 1 Gigabit Ethernet
- Integrated phase noise in aerospace systems
- Walkie-talkies
- Peripheral devices
- Signal generator
- High-frequency induction heating
- PCI express cards
- Main oscillator in receiver
