NB2304AI2D Overview
As a clock IC, PLLs is packaged using the Tube method. As part of the 8-SOIC (0.154, 3.90mm Width) package, this clock generator is embedded. A maximum temperature of 240 can be sustained by this clock generator ic during reflowing. As you can see, it consists of 8 terminations. This electronic frequency generator requires a voltage of 3.3V. CMOS is designed for clock generator's input. To access the electronic component's full performance, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 133.3MHz is available. The Surface Mount allows the electrical component to be installed conveniently on the panel. It would be possible to supply this clock PLL with 3.6V of power. It is safe to use this frequency synthesizer with a supply voltage above 3V. Clock PLL works with 3V~3.6V supply voltage provided. The temperature should be set at -40°C~85°C to ensure reliable performance. As far as this electronic part is concerned, it can be classified as a Zero Delay Buffer component. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. These related electrical parts are available for the base part number NB2304A. There is a 8 pin that is available on the frequency synthesizers. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. At 0.4 ns Max, this clock generator offers low timing skew. 4 high true output enable pins are available on this clock generator.
NB2304AI2D Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs
NB2304AI2D Applications
There are a lot of ON Semiconductor NB2304AI2D Clock Generators applications.
- Computers to manage memory cards
- HDD recorders
- DVD recorders
- Radar
- Clock signals to the high-speed Digital RF circuits
- 1 Gigabit Ethernet
- FM demodulation networks for FM operations
- Signal modulation and demodulation
- Clock recovery
- High-frequency induction heating
