N25S818HAT21I Overview
In this case, the memory type of the device can be classified as Volatile. It comes in a Tube. The case is embedded in 8-TSSOP (0.173, 4.40mm Width). Memory size on the chip is 256Kb 32K x 8. The device uses a mainstream SRAM-format memory. Featuring an extended operating temperature range of -40°C~85°C TA, this device allows it to be used in a variety of demanding applications. The supply voltage can be up to 1.7V~1.95V. There is a recommendation that Surface Mount mounting type should be used for this product. 8 terminations are planted on the chip. As many as 1 functions are supported for comprehensive working. The memory device is designed to be supplied with an 1.8V volt power supply in order to operate properly. A clock frequency rotation within 16MHz is used for the ic memory chip to rotate data. In order to select similar parts, typical manufacturers refer to N25S818HA as the device's base part number. This memory device is enclosed in a 8-pin package. I have noticed that the memory device has 8 pins, which indicates that it has 8 locations in the memory. This memory runs on an 1.8V operating supply voltage. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. In terms of its nominal supply current, this memory component is rated at 10mA. An address can be read and/or written to one memory address using 1 ports on the chip. I/O port addresses on this device are mapped to memory addresses of SEPARATE bits.
N25S818HAT21I Features
Package / Case: 8-TSSOP (0.173, 4.40mm Width)
8 Pins
Operating Supply Voltage:1.8V
I/O Type: SEPARATE
N25S818HAT21I Applications
There are a lot of ON Semiconductor N25S818HAT21I Memory applications.
- printers
- DVD disk buffer
- Cache memory
- multimedia computers
- servers
- telecommunications
- networking
- eSRAM
- personal computers
- networks
