MC74HCT373ANG Overview
The package in which it is embedded is named 20-DIP (0.300, 7.62mm). Tube is the packaging method. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. The way in which this electronic part is mounted is Through Hole. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of -55°C~125°C is set as the operating temperature. This FPGA is part of the 74HCT series. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations. The family it belongs to is 74HCT373. With a supply voltage of 5V, it operates. It is equipped with 20 pin count. It is a member of the HCT family of electronic devices. With the design of the board, there are only 20 pins. Through Hole is the way in which this electronic part is mounted. This device is equipped with 2 ports. FF/Latches is the subcategory of this part. A total of 5V power supplies are needed to run it. Due to its 6mA output current, it offers maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. It consumes 4μA of quiescent current without being affected by outside factors. Its superior flexibility is achieved by using 8 circuits.
MC74HCT373ANG Features
20-DIP (0.300, 7.62mm) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
MC74HCT373ANG Applications
There are a lot of ON Semiconductor MC74HCT373ANG Latches applications.
- Hammer Device Information
- Registers
- BCD counting
- Automotive Infotainment
- Serial Input
- Counters
- Lamp and Display (LED)
- Synchronous frequency dividers
- Network Switches
- Frequency
