MC74HCT273ADWG Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is contained within the Tubepackage. There is a Non-Invertedoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is at -55°C~125°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. JK flip flop is a part of the 74HCTseries of FPGAs. A frequency of 30MHzshould not be exceeded by its output. A total of 1 elements are present. Despite external influences, it consumes 4μAof quiescent current. The number of terminations is 20. It is a member of the 74HCT273 family. A voltage of 5V is used as the power supply for this D latch. This D flip flop belongs to the family of HCT. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 20 pins. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. An electronic part designed with 8bits is used in this application. Considering the reliability of this T flip flop, it is well suited for RAIL. An electrical current of 5V volts is applied to it. Optimal efficiency requires a supply voltage of 5V. With a current output of 4mA , it offers maximum design flexibility. There are 8 output lines in this JK flip flop. 8 channels are available.
MC74HCT273ADWG Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
MC74HCT273ADWG Applications
There are a lot of ON Semiconductor MC74HCT273ADWG Flip Flops applications.
- Reduced system switching noise
- CMOS Process
- Test & Measurement
- Common Clocks
- Memory
- Consumer
- Computing
- Parallel data storage
- ESD performance
- Data storage
