MC74HC573ADWR2G Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. A Cut Tape (CT) package is used to package it. In this configuration, the output is set to Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. With a supply voltage of 2V~6V, it operates. It operates at -55°C~125°C degrees Celsius. The 74HC series of FPGAs is the one this FPGA belongs to. 8 Bits are used in the design of this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. It belongs to 74HC573 family. With a supply voltage of 3V, it operates. 20 pins are included. It is part of the family of electronic devices called HC/UH. It is designed with 20 pins. It is mounted according to the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In the subcategory FF/Latches, this part belongs. During this period, the maximum supply voltage (Vsup) reaches 6V. A total of 2/6V power supplies are required for it to operate. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. It consists of 3 input lines from which an electronic circuit can be built. On the basis of its reliability, this device is well suited for TAPE AND REEL. Due to its 7.8mA output current, it offers maximum design flexibility. The quiescent current consumed by it is 4μA because it is unaffected by external factors.
MC74HC573ADWR2G Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
MC74HC573ADWR2G Applications
There are a lot of ON Semiconductor MC74HC573ADWR2G Latches applications.
- Multi-line decoders
- Communication systems
- Stacked or Push-Down Registers
- Shift register
- Bus system register with enable parallel lines at bus side
- Parallel data synchronization
- Relay
- Flip-flops
- Automotive ADAS
- Counter timers
