MC74HC4851ADTR2G Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Around -55°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 16 series. A 1 circuit is present in this switch device. Search with MC74HC4851A if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 1.7kOhm. You can find the functions of the 16 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. Analog switch ics with Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 2V. This digital switch can be operated with a current of 20μA. A voltage of 2V~6V is required to drain this analog switch from a single voltage supply. Operating the 8 inputs requires 8 inputs.
MC74HC4851ADTR2G Features
8 Channels
20μA Supply Current
MC74HC4851ADTR2G Applications
There are a lot of ON Semiconductor MC74HC4851ADTR2G Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- SONET
- Fault Tolerant Systems
- T1/E1 Terminals
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Fiber In The Loop (FITL)
- Channelized and Unchannelized DS3 applications
- Frame Relay Equipment
- Video switching
- Fiber to the Home
