MC74HC4020ADR2G Overview
The device is packaged in the 16-SOIC (0.154, 3.90mm Width)type. This configuration uses 16terminations. By supplying 3Vwith a voltage of 3V , the device can be operated in a completely flexible manner. All component pins are equal to 16. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 16pins that connect other components. The Surface Mountway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 14bits for each element. Based on the Pbfree code, the result may be yes. Further related parts may be found under the base part number 74HC4020. For its packaging, TAPE AND REELis employed. From the voltage source, there is a voltage of 2/6V volts. As low as 2V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 6V (Vsup). There are 1 input lines that allow binary data to be input in the form of an on/off signal. The device is equipped with a 12output line.
MC74HC4020ADR2G Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
14 bits per element
MC74HC4020ADR2G Applications
There are a lot of ON Semiconductor
MC74HC4020ADR2G Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
