MC74ACT574DWG Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. This output is configured with Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop is a part of the 74ACTseries of FPGAs. This D flip flop should not have a frequency greater than 100MHz. The element count is 1 . Terminations are 20. The 74ACT574family includes it. It is powered from a supply voltage of 5V. The input capacitance of this JK flip flopis 4.5pF farads. Electronic devices of this type belong to the ACTfamily. The electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It is designed with a number of bits of 8. In order to achieve its superior flexibility, 8 circuits are used. The D latch operates on 5V volts. The flip flop contains 2ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The output current of 24mA makes it feature maximum design flexibility. There are no output lines on the JK flip flop. Quiescent current is consumed by the D latch in the amount of 8μA.
MC74ACT574DWG Features
Tube package
74ACT series
20 pins
8 Bits
5V power supplies
MC74ACT574DWG Applications
There are a lot of ON Semiconductor MC74ACT574DWG Flip Flops applications.
- Count Modes
- Pattern generators
- Data Synchronizers
- Supports Live Insertion
- Computing
- Bus hold
- Communications
- Bounce elimination switch
- Buffer registers
- Data transfer
