MC74ACT573DWR2G Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. The package is in the form of Tape & Reel (TR). It uses Tri-State as its output configuration. There is D-Type Transparent Latch logic type for this electrical device. The way in which this electronic part is mounted is Surface Mount. It operates with a supply voltage of 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. There are a number of FPGAs in this series, including this one. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. As a member of the 74ACT573 family, it falls under that category. In order to operate it, the supply voltage must be 5V. 20 pins are provided. In terms of electronic devices, this one is in the ACT family. The 20 pins are designed into it. Surface Mount is used to mount this electronic part. As far as ports are concerned, this device has 2 ports. There is a subcategory of FF/Latches for this part. It operates from 5V power supplies. The reliability of this device makes it well suited to TR. Due to its 24mA output current, it offers maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. 3 output lines provide binary equivalents of input lines. Aquiescent current is consumed by 8μA without being affected by external forces. In order to achieve its superior flexibility, 8 circuits are used.
MC74ACT573DWR2G Features
20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
MC74ACT573DWR2G Applications
There are a lot of ON Semiconductor MC74ACT573DWR2G Latches applications.
- Multistage ripple counting
- Parallel-to-Serial Data Conversion
- Automotive Cluster
- Shift right register
- Counters
- OC-48 communication systems
- Storage
- Display driver
- Bus system register with enable parallel lines at bus side
- BCD counting
