MC74ACT373DTR2 Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). This package has the format of Tape & Reel (TR). It uses Tri-State as the output. There is D-Type Transparent Latch logic type for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A voltage of 4.5V~5.5V is used as the supply voltage for this device. There is a temperature of -40°C~85°C TA at which the system operates. The 74ACT series of FPGAs is the one this FPGA belongs to. An electronic part with 8 bits is designed. This device has been designed with 20 terminations available. The family 74ACT373 includes it. With a supply voltage of 5V, it operates. With 20 pins, it is equipped. This electronic device belongs to the family of ACT. The pin configuration of the device is 20. The electronic part is mounted using the Surface Mount method. This device has 2 ports. FF/Latches is the subcategory of this part. There is 5V power supply for it. An electronic circuit can be found on 8 input lines. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines.
MC74ACT373DTR2 Features
20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
MC74ACT373DTR2 Applications
There are a lot of ON Semiconductor MC74ACT373DTR2 Latches applications.
- Relay replacement
- Buffer Storage
- Control circuits
- Pattern generators
- Parallel data synchronization
- Storage
- Counter timers
- Stacked or Push-Down Registers
- Address register
- Multi-line decoders
