MC74AC573DTR2G Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) is the packaging method. Tri-State is used for the output it is configured with. There is D-Type Transparent Latch logic type for this electrical device. The way in which this electronic part is mounted is Surface Mount. A 2V~6V supply voltage is required to operate it. During operation, the temperature is set at -40°C~85°C. An FPGA in this series belongs to the 74AC family. An electronic part with 8 bits is designed. The device consists of 20 terminations that are designed to be used in conjunction with it. This type belongs to the 74AC573 family. With the supply voltage set at 5V, it is able to operate. The device is equipped with 20 pins. In terms of electronic devices, this one is in the AC family. With the design of the board, there are only 20 pins. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports on board, which are all available at the same time. The part is in the FF/Latches subcategory. There is a maximum voltage supply (Vsup) that reaches 6V. There should be a voltage supply (Vsup) greater than 2V. The device's reliable performance makes it a good choice for TAPE AND REEL. 3 output lines provide binary equivalents of input lines. It consumes 8μA of quiescent current without being affected by outside factors. The superior flexibility of this circuit can be attributed to the use of 8 circuits.
MC74AC573DTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC573 family
20 pin count
20 pins
MC74AC573DTR2G Applications
There are a lot of ON Semiconductor MC74AC573DTR2G Latches applications.
- Buffer/Storage Registers
- Audio and video switching
- Decade counting 7-segment decimal display
- Frequency dividing
- Counting
- Decade counting
- Counter control
- Double bus register system
- Shift left with parallel loading
- Data acquisition
