MC74AC377DTR2G Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). The package Tape & Reel (TR)contains it. In the configuration, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 2V~6Vis required for its operation. In this case, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74AC series. You should not exceed 140MHzin its output frequency. The element count is 1 . There is 8μA quiescent consumption. The number of terminations is 20. It is a member of the 74AC377 family. The power source is powered by 5V. There is 4.5pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as AC. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. It is designed with a number of bits of 8. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 2V. Due to its superior flexibility, it uses 8 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. High efficiency requires the supply voltage to be maintained at 5V.
MC74AC377DTR2G Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
MC74AC377DTR2G Applications
There are a lot of ON Semiconductor MC74AC377DTR2G Flip Flops applications.
- Asynchronous counter
- Event Detectors
- Circuit Design
- Communications
- Computers
- Data Synchronizers
- Frequency Dividers
- Individual Asynchronous Resets
- ESD performance
- Frequency Divider circuits
