MC33074P Overview
Packaged in a PDIP case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 5mV for this buffer op amp. 100dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 85°C should be used. The operating supply voltage of the buffer op amp is rated at 22V. For packing the buffer amplifier, the RAIL-axis is adopted. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 44V. A high supply voltage of more than 3V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 22V volts.
MC33074P Features
14 Pins
supply voltage of 15V
100dB voltage gain
MC33074P Applications
There are a lot of ON Semiconductor
MC33074P Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
