Name: MC14053BFG
Brand: ON Semiconductor
SKU: MC14053BFG
Availability: InStock

new-10%

MC14053BFG

Manufacturer part number:MC14053BFG

Manufacturer:ON Semiconductor

Description:SPDT 280Ohm Analog Switches BREAK-BEFORE-MAKE MC14053B 16 Pins 100nA 5V 16-SOIC (0.209, 5.30mm Width)

Case Package:SOT-23

Datasheet:MC14053BFG Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	280Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC14053B
Pin Count	16
Power Supplies	5/15V
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	18V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	360nA
Power Dissipation	500mW
Propagation Delay	65 ns
Turn On Delay Time	550 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Supply Type	Dual
Bandwidth	17MHz
Turn-Off Delay Time	550 ns
On-State Resistance (Max)	280Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	7.5pF
On-state Resistance Match-Nom	25Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	3V~18V
Signal Current-Max	0.025A
Height Seated (Max)	2.05mm
Length	10.2mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

MC14053BFG Product Details

MC14053BFG Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.209, 5.30mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. 2:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -55°C~125°C TA are extended for operation. 16 terminations have been made so far. By its 2 channels, the electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the electrical part body. Multiplexers built on a SPDT switching circuit are built. There are 3 circuits in this switch device. Search with MC14053B if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 280Ohm. Datasheets for 16 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 18V in normal situations. Analog switch ics with Dual supply type are cost-effective. 3V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 360nA. An analogue multiplexer drains from a single voltage supply at 3V~18V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. The electrical component supports 6 inputs. The data can be transferred over a wide range of bandwidths, called 17MHz bandwidths.