MC10EL33DTR2 Overview
The device is packaged in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)type. This configuration uses 8terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 8. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 8pins that connect other components. The Surface Mountway is used to mount it. Due to the fact that it is a member of the 10ELseries, it has a wide range of applications. Logic type Divide-by-4 is adopted. Ideally, the operating temperature should be set to -40°C~85°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. It is important to note that NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vare really important features of this electronic device. Further related parts may be found under the base part number 10EL33. From the voltage source, there is a voltage of -5.2V volts. As low as 4.2V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 5.7V (Vsup). The device has a configuration of 1 data/clock inputs.
MC10EL33DTR2 Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC10EL33DTR2 Applications
There are a lot of ON Semiconductor
MC10EL33DTR2 Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
