MC10E411FNR2 Overview
As far as the case type is concerned, the cut smart buffer is available in 28-LCC (J-Lead). There is a Tape & Reel (TR) packaged with it. It is recommended that the maximum value for normal operation is 700MHz. It contains 28 terminations. With a supply voltage of 5V, it is possible to achieve a high level of efficiency. As you can see, it is mounted by Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). Set the temperature to 0°C~85°C for reliable performance. In general, it should be able to work with a power source of 4.5V~5.5V volts. It has been positioned in the way of Surface Mount. There are 28 pins on timeing clock. The output of it is ECL, PECL. A 28 pin is used for operation. It is a member of the MC10E411 family. The cut smart buffer you are looking for is contained within Clock Drivers. A member of the 10E family, this clock buffer is a digital camera. There is a 5.5V maximum supply voltage set (Vsup). The supply voltage (Vsup) should be maintained above 4.5V in order for the clock divider to operate normally. By default, the output of the circuit clock is set to 18. As a result, it requires a supply voltage of -5.2V volts to run. It is part of the 10E series of electrical components. As a result of utilizing this gadget, NECL MODE: VCC = 0V WITH VEE = -4.5V TO -5.5V is also available.
MC10E411FNR2 Features
28 terminations
The operating temperature of 0°C~85°C degrees
Clock Drivers subcategory
MC10E411FNR2 Applications
There are a lot of ON Semiconductor MC10E411FNR2 Clock Buffers & Drivers applications.
- Window comparator
- 5G
- Automatic test equipment
- High reliability telecommunication system
- Internet of Things
- Cloud computing
- Cell Phone (UMTS/WCDMA/GSM)
- Host bus adapter card
- Edge computing
- Telecommunications
