MC10E211FN Overview
It is package in 28-LCC (J-Lead) case. In case Tube, the cut smart buffer is available. It is normal to operate with a value of 700MHz. A total of 28 terminations can be found in it. The supply voltage of 5V is capable of providing high efficiency. In this case, it will be mounted by Surface Mount. This electronic component falls under the classification of Fanout Buffer (Distribution), Multiplexer. When the temperature is set to 0°C~85°C, reliable performance is ensured. In order for it to function, a power source of 4.2V~5.7V V must be available. It has been positioned in the way of Surface Mount. There are 28 pins on timeing clock. There is ECL, PECL output from clock driver. In order for the timeing clock to operate, it is connected to the 28 pins. Basically, it belongs to the same family as the MC10E211. There is a cut smart buffer contained in Clock Drivers that is used for this purpose. It is part of the 10E family of electronic buffer ICs. In this case, Vsup will be set to 5.7V (decimal). For normal operation, the supply voltage (Vsup) should be kept above 4.2V. As a result, it requires a supply voltage of -5.2V volts to run. In this case, the electronic part belongs to the 10E series. This gadget can also be used to obtain NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V.
MC10E211FN Features
28 terminations
The operating temperature of 0°C~85°C degrees
Clock Drivers subcategory
MC10E211FN Applications
There are a lot of ON Semiconductor MC10E211FN Clock Buffers & Drivers applications.
- Clock signal format conversion
- Hardware accelerator
- Mobile Internet Device (MID)
- Gigabit Ethernet (GbE)
- Industrial automation control system
- Measurement test
- Other clock/data distribution
- Medical instruments
- High speed line receiver
- OTN
