MC10E136FN Overview
The device is packaged in the 28-LCC (J-Lead)type. This configuration uses 28terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 28. There is a package in the form of Tube. As part of the circuit, there are 28pins that connect other components. The Surface Mountway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 10Eseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to 0°C~85°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 6bits for each element. Further related parts may be found under the base part number 10E136. From the voltage source, there is a voltage of -5.2V volts. As low as 4.2V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 5.7V (Vsup).
MC10E136FN Features
Embedded in the 28-LCC (J-Lead) package
6 bits per element
MC10E136FN Applications
There are a lot of ON Semiconductor
MC10E136FN Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
