MC10E111FNR2G Overview
The clock divider is available in 28-LCC (J-Lead) case. In case Tape & Reel (TR), the cut smart buffer is available. A total of 28 terminations are present in it. With a voltage of 5V, high efficiency is possible. In this case, it will be mounted by Surface Mount. Electronic components classified as Fanout Buffer (Distribution) fall into this category. When the temperature is set to -40°C~85°C, reliable performance is ensured. It should be able to work with a power source of 4.2V~5.7VV. It has been positioned in the way of Surface Mount. It has a pin count of 28. As a result, it produces ECL, PECL. Operation is performed with 28 pins. It is a member of the MC10E111 family. A cut smart buffer of this type is contained in Clock Drivers. The electronic gadget belongs to the 10E family. In this case, Vsup will be set to 5.7V (decimal). For normal operation, the supply voltage (Vsup) should be kept above 4.2V. Default settings are set to output 18. There is a -5.2V volt supply attached to it. A component of the 10E series can be found in this electrical part. It is also possible to obtain NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V when using this gadget. As long as the frequency of the clock switch is set to 800MHz, excellent accuracy can be achieved.
MC10E111FNR2G Features
28 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 800MHz frequency
MC10E111FNR2G Applications
There are a lot of ON Semiconductor MC10E111FNR2G Clock Buffers & Drivers applications.
- Machine made
- Big data
- Handheld test instruments
- Microserver
- Smartphone
- OTN
- Base station
- Patient diagnosis
- DDR4 JEDEC standard RDIMM design
- Cell Phone (UMTS/WCDMA/GSM)
