MC10E111FNR2 Overview
There is a case available for the cut smart buffer in 28-LCC (J-Lead). There is a Tape & Reel (TR) package attached to it. It is recommended that the maximum value for normal operation is 800MHz. 28 terminations have been recorded. Using a supply voltage of 5V allows for high efficiency. Consequently, it will be mounted by Surface Mount. Fanout Buffer (Distribution)?is?the?classification?for?this?electrical?component. It is recommended to set the temperature to -40°C~85°C in order to ensure reliable performance. The clock switch should be able to be powered by a 4.2V~5.7V V source. In the direction of Surface Mount, it is placed. It has a number of pins of 28. Its output is ECL, PECL. Operation is performed using the 28 pins. It belongs to the family MC10E111. The clock divider is located in Clock Drivers. It belongs to the family of electronic gadgets known as 10E. This is set to 5.7V for the maximum supply voltage. Normal operation requires a voltage above 4.2V for the supply voltage (Vsup). By default, the output of the circuit clock is set to 18. Power is provided by a -5.2V volt source. The 10E series refers to this electrical component. In addition, NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V can be obtained when using this gadget.
MC10E111FNR2 Features
28 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
MC10E111FNR2 Applications
There are a lot of ON Semiconductor MC10E111FNR2 Clock Buffers & Drivers applications.
- OTN
- Microserver
- Measurement test
- High-end consumer electronics
- Telecommunications
- Synchronous optical network (SONET)
- Peak detection
- Furniture
- Clock signal duplication
- Zero crossing detector
