MC100LVEP11DTR2G Overview
There is a case available for the cut smart buffer in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). There is a case available for the circuit clock in Tape & Reel (TR). Normal operation is limited to 3GHz. A total of 8 terminations are present in it. The supply voltage of 2.5V is capable of providing high efficiency. In this case, it will be mounted by Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). The temperature should be set to -40°C~85°C to ensure reliable performance. The clock switch should operate with a voltage of 2.375V~3.8VV. It's in the way of Surface Mount. On this board, there is a pin count of 8. The output is ECL, PECL. In order for the timeing clock to operate, it is connected to the 8 pins. Basically, it belongs to the same family as the MC100LVEP11. There is an embedded device in Clock Drivers containing this circuit clock. As a rule, the supply voltage (Vsup) should be kept above 2.375V for normal operation. It is set to output 4 by default. A electronic part of this series belongs to the 100LVEP family. It can accept voltages up to 2.42V.
MC100LVEP11DTR2G Features
8 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
MC100LVEP11DTR2G Applications
There are a lot of ON Semiconductor MC100LVEP11DTR2G Clock Buffers & Drivers applications.
- Peak detection
- Tlecom applications
- Ultra Mobile PC (UMPC)
- Host bus adapter card
- Handheld test instruments
- Switch
- High-end consumer electronics
- Gigabit Ethernet (GbE)
- Dual core processor workstations and servers
- High speed industry
