Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MC100EP57DT

MC100EP57DT

MC100EP57DT

ON Semiconductor

20 Terminations±3V~5.5V 20 Pin 100EP57 Signal switch100EP Series 1 Outputs1 Functions

SOT-23

MC100EP57DT Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Operating Temperature-40°C~85°C
PackagingTube
Published 2006
Series 100EP
JESD-609 Code e4
Pbfree Code yes
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Type Differential Digital Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional FeatureNECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V;
Subcategory Multiplexer/Demultiplexers
Packing Method RAIL
Technology ECL
Voltage - Supply ±3V~5.5V
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch0.65mm
[email protected] Reflow Temperature-Max (s) 40
Base Part Number 100EP57
Pin Count20
Number of Outputs 1
Circuit 1 x 4:1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Throw Configuration DPST
Propagation Delay475 ps
Quiescent Current52mA
Logic Function Multiplexer, Mux
Number of Inputs 4
Supply Type Dual
Prop. [email protected] 0.52 ns
High Level Output Current-50mA
Low Level Output Current50mA
Power Supply Current-Max (ICC) 65mA
Voltage Supply SourceDual Supply
Length 6.5mm
Radiation HardeningNo
RoHS StatusNon-RoHS Compliant
Lead Free Lead Free
In-Stock:1145 items

MC100EP57DT Product Details

MC100EP57DT Overview


In order to save board space, digital switch is located in the 20-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tube.For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Differential Digital Multiplexer.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at ±3V~5.5V, designers are provided with a greater degree of flexibility.The multiplexers from 100EP series can be used for a wide range of applications.There is a design for terminating 20 as part of its basic configuration.As its base part number is 100EP57, logic switch can also be used to find its related parts.The multiplexer's system is powered by 3.3V volts.A component pin count of 20 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.As a type of supply, Dual is employed.This multiplexer ic has 20 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.Keeping the minimum supply voltage (Vsup) at 3V prevents some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 5.5V.In order for the turn signal switch to work, there are 1 outputs.In electronic terms, the digital switch ic is classified as Multiplexer/Demultiplexers.Not being affected by the external factors, consumes 52mA current of multiplexer ic.This multiplexer has a total of 4 inputs.In accordance with RAIL, switches can be packaged.Additionally, NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V; provides improved characteristics.To operate the digitalswitch normally, 1 circuits are formed.

MC100EP57DT Features


Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V;

MC100EP57DT Applications


There are a lot of ON Semiconductor MC100EP57DT Signal Switches / Multiplexers / Decoders applications.

  • To select different task for memory in microprocessor memory systems
  • Data transfer
  • Seven segment displays
  • Medium scale TV wall
  • Decimal decoder
  • War field flying robot with a night vision flying camera
  • Automation system
  • Audio transmission
  • Recording transmission
  • Computer memory

Get Subscriber

Enter Your Email Address, Get the Latest News