MC100EP31DTR2G Overview
The item is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)cases. You can find it in the Tape & Reel (TR)package. Currently, the output is configured to use Differential. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. A voltage of -3V~-5.5Vis used as the supply voltage. Currently, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. The 100EPseries comprises this type of FPGA. Its output frequency should not exceed 3GHz Hz. It consumes 45mA of quiescent current without being affected by external factors. It has been determined that there have been 8 terminations. This D latch belongs to the family of 100EP31. Power is provided by a 3.3V supply. In this case, the electronic component is mounted in the way of Surface Mount. This board has 8 pins. It has a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. It is designed with 1bits. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. The supply voltage (Vsup) should be kept above 3V for normal operation. Despite its superior flexibility, it relies on 1 circuits to achieve it. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. It runs on -4.5Vvolts of power. As an additional reference, you may refer to electronic flip flop NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V.
MC100EP31DTR2G Features
Tape & Reel (TR) package
100EP series
8 pins
1 Bits
-4.5V power supplies
MC100EP31DTR2G Applications
There are a lot of ON Semiconductor MC100EP31DTR2G Flip Flops applications.
- Latch
- Differential Individual
- Computing
- Shift registers
- ESD protection
- ESD performance
- Buffer registers
- Modulo – n – counter
- 2 – Bit synchronous counter
- Control circuits
