MC100EP016FA Overview
The device is packaged in the 32-LQFPtype. This configuration uses 32terminations. By supplying 3.3Vwith a voltage of 3.3V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 32. There is a package in the form of Tube. As part of the circuit, there are 32pins that connect other components. The Surface Mountway is used to mount it. Due to the fact that it is a member of the 100EPseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -40°C~70°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 8bits for each element. It is important to note that NECL MODE: 0V VCC WITH VEE = -3.0V TO -5.5Vare really important features of this electronic device. Further related parts may be found under the base part number 100EP016. For its packaging, TRAYis employed. From the voltage source, there is a voltage of -4.5V volts. As low as 3V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 5.5V (Vsup).
MC100EP016FA Features
Embedded in the 32-LQFP package
8 bits per element
NECL MODE: 0V VCC WITH VEE = -3.0V TO -5.5V
MC100EP016FA Applications
There are a lot of ON Semiconductor
MC100EP016FA Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
