MAX810TTRG Overview
As you can see, this power management is mounted through 3 terminals. It is packaged with Cut Tape (CT). In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 3 pins. This power management system has 3 pins. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~105°C TJ degrees. Power management has an output of Push-Pull, Totem Pole during operation. As far as the supply current of the power management is concerned, it is 800nA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX810, which is the base power ics number.
MAX810TTRG Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
MAX810TTRG Applications
There are a lot of ON Semiconductor MAX810TTRG Voltage Supervisors applications.
- Battery-powered equipment
- Detection of phase sequence
- Detection of phase loss
- Automotive power systems
- Smartphones
- Dash board
- emergency room
- Unattended substation automation
- Electrical fire monitoring system
- Power distribution systems of operating room
