MAX809SQ232T1G Overview
It is mounted through 3 terminals on the power management. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find SC-70, SOT-323 functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. In a 3.3V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. This power management has 3 pins. It is recommended that Vsup should not be less than 1.2V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~105°C TJ. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a 800nA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX809, the base power ics number.
MAX809SQ232T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
MAX809SQ232T1G Applications
There are a lot of ON Semiconductor MAX809SQ232T1G Voltage Supervisors applications.
- Leakage current detection
- Dash board
- Radio
- Display equipment
- Important electronics for automotive protection
- Smart meter
- Power distribution systems of CCU
- Microcontroller system
- Automotive power systems
- Electronics installed in the vehicle
