LM358DMR2 Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp ic of the General Purpose type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 7mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. This op amp can operate from a supply current at 1.5mA. There should be no change in the voltage gain at 100dB. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of instrumentation amplifier is rated 16V voltage. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.
LM358DMR2 Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM358DMR2 Applications
There are a lot of ON Semiconductor LM358DMR2 Instrumentational OP Amps applications.
- Portable docking station
- Ultrasound transducers
- Automotive sensors
- Micro signal measurement
- Video computer boards
- Displayers for aircraft and air transportation control systems
- Proportional operation circuits
- Medical imaging
- Weak signal detection
- Addition operation circuits
