LM339DR2 Overview
A convenient transport package is provided in SOIC .The comparator has a TTL output.The part will be shipped by Cut Tape (CT) .There are 14 terminals on the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 4 elements.As a result, it contains 14 pins.The comparator is equipped with 14 pins.Search LM339 to find more pin-to-pin solutions.There is a quiescent current of 2.5mA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 2mA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 2mA .In order to run the device, there are only 5V power supplies required.A maximum current of 250nA can be supplied to the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .An increase in temperature over 70°C is not recommended.Comparator electronics cannot be operated at a temperature lower than 0°C .In the comparator, the maximum supply voltage is 36V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 3V .
LM339DR2 Features
TTL output capability
General Purpose IC
Employing 4 elements
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339DR2 Applications
There are a lot of ON Semiconductor
LM339DR2 linear comparators applications.
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
