LM324ADTBG Overview
There is a 14-TSSOP (0.173, 4.40mm Width) case in which the instrumentation amplifier is packaged. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. A total of 14 terminations have been reported in the past few weeks. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 14 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at 0°C~70°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.4mA and 10 . The voltage gain should stay at 100dB. There are 4 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 16V. An buffer amplifier is packed in a RAIL-shape according to the design.
LM324ADTBG Features
14 Pins
supply voltage of 5V
100dB voltage gain
LM324ADTBG Applications
There are a lot of ON Semiconductor LM324ADTBG Instrumentational OP Amps applications.
- Micro signal measurement
- Inverse/same-phase proportional circuit
- Active probe
- Portable docking station
- Fast A/D and D/A converters
- Polarized electrodes
- Test equipment
- High input resistance broadband
- RF cable systems
- single/dual op amp sum and difference circuits
