LM2902VDR2 Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 14 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 14. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 14 pins. In terms of input offset voltage, operational amplifier rates 7mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . As long as the supply current of the chip does not exceed 1.4mA, this op amp ic can operate. It is recommended to keep the voltage gain at 100dB at all times. The op amp is rated for an operating supply voltage of 4. The operating supply voltage of instrumentation amplifier is rated 16V voltage. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.
LM2902VDR2 Features
14 Pins
supply voltage of 5V
100dB voltage gain
LM2902VDR2 Applications
There are a lot of ON Semiconductor LM2902VDR2 Instrumentational OP Amps applications.
- Non-polarized electrodes
- Instrumentation
- Measurements of Wheatstone bridge
- Power generator
- Television
- Subtraction operation circuits
- ECG equipment
- Band-pass filter
- Navigation
- Polarized electrodes
