KA393DTF Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .The chip is packaged with Tape & Reel (TR) .The device is designed with 8 terminations.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 2 elements in it.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search KA393 .A quiescent current of 2.5mA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 600μA supply current.If the current supply exceeds 1mA , the comparator might be damaged.This device requires 5V power supplies to operate.Input current to the device cannot exceed 250nA .The voltage formula shows that the part has a voltage gain of 106.02dB .The operating supply voltage for normal operation should be 36V .Comparator electronics is acceptable to pack the device by TR .
KA393DTF Features
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
KA393DTF Applications
There are a lot of ON Semiconductor
KA393DTF linear comparators applications.
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Limit Comparators
