KA393 Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .We ship the part through Tube .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as General Purpose .A total of 2 elements can be found in it.A Through Hole mounting type is recommended.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.Alternatively, you may search for KA393 to find more pin-to-pin solutions for your specific needs.There is 2.5mA current flowing in this comparator.There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 600μA .A current supply greater than 1mA may cause the comparator to malfunction.The device can be run with 5V power supplies.Electronic comparator is possible to input a maximum of 250nA current into the device.Comparator electronics follows that the voltage gain of the part is 106.02dB .For normal operation, there should be 36V operating supply voltage applied.
KA393 Features
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
KA393 Applications
There are a lot of ON Semiconductor
KA393 linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
