FSTD3125MTC Overview
This is a relatively small item of digital switch that is included in the 14-TSSOP (0.173, 4.40mm Width) in order to save space on the board.As a result, it is packaged in a way that is referred to as Tube.The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.There is a design for terminating 14 as part of its basic configuration.To find signal switch's related components, a base part number of 3125 may also be used.The multiplexer's system is supplied with a voltage of 5V.GULL WING represents the end of conductors.The logic switch is a member of the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 1 bits.Keeping Vsup at 5.5V will prevent some unnecessary failures.In order for 5V to operate normally, a power supply is provided.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.This signal switching operates at a resistance of 2.
FSTD3125MTC Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Power supplies of 5V
FSTD3125MTC Applications
There are a lot of ON Semiconductor FSTD3125MTC Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- Automatic health monitoring systems
- Robotic vehicles
- Idle motor
- Logic circuits
- RF-based home automation system
- Injectors
- Automation system
- To select different devices in microprocessor output
- Used to connect a single source to multiple destinations
