FIN1108MTDX Overview
As a convenience to the user, power buffer has been packaged in 48-TFSOP (0.240, 6.10mm Width).Packaged in Tape & Reel (TR) ready for power buffer.Surface Mount Universal mout to make it easier for you to adjust.It is important to note that this is a typical Buffer, ReDriver type.As far as the voltage is concerned, this op amp buffer uses 3V~3.6V volts.There is no input provided by it.To make sure that the cooling system does not malfunction, you should set the operating temperature to -40°C~85°C.The objective of this operational amplifier buffer is to serve applications in the LVDS domain and other areas as well.In order to find more pin-to-pin solutions that will fit your specific needs, try typing "FIN1108" in the search box.There is a 48 terminal on the op amp buffer, which can be seen in the picture below.There is a peak reflow temperature of 260 for this power buffer.This splitter consists of 3.3V voltage and is able to accomplish a variety of tasks that are splittericularly demanding.There are 48 pins on it.It is mounted on PCBs or other boards using a Surface Mount.In addition to the power buffer, other Line Driver or Receivers also play an important role.Using 80mA as a voltage, this power buffer operates.It is necessary to supply voltage 3.3V for normal operation.Using a 8-Bit receiver, it transmits and receives data.For normal use of the splitter, the nominal supply current should be 80mA.A 8 element interface repeater signal is shown here.
FIN1108MTDX Features
Mainly used in LVDS.
A standard Line Driver or Receivers.
8-Bit receiver.
FIN1108MTDX Applications
There are a lot of ON Semiconductor FIN1108MTDX Signal Buffers, Repeaters, Splitters applications.
- Clock Distribution
- Portable IPC/HMI
- Digital Crossconnects
- Clock Distribution
- Backplane Interconnect
- Loopback
- DSLAMs
- Communications Switchers
- Storage Area Networks
- Add/Drop Muxes
