FAN54040UCX Overview
There is a package for Tape & Reel (TR) in which it can be found.We've included it in the 20-UFBGA, WLCSP package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -30°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number FAN54040 can be found by following the order of the base part number.It contains a total of 25 terminations.There are various programmable features, such as Current, Timer, Voltage.It requires pins 25 to function.The number of available channels is 2.It should be able to run off a battery of 5V.In order for the device to operate properly, the supply voltage should not exceed 6V.When the output voltage is 4.2V, high efficiency is possible.In this case, the output current of the device is set to 2.3A.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A supply voltage of 4V is suitable for it, because it can operate with a low supply voltage.Amounting is in line with Surface Mount.Vsup (maximum supply voltage) is set in the command to 0.28mA.The part's power supply is set to a value of 5V.Its supply carries 1.55A current.Input voltage is limited to 28V volts.As a maximum output supply voltage for this operation, the voltage must be set to 4.4V.In the course of operation, the maximum output current is reduced to 1.55A.
FAN54040UCX Features
2 channels
Power Management Circuits subcategory
20-UFBGA, WLCSP package
FAN54040UCX Applications
There are a lot of ON Semiconductor
FAN54040UCX Battery Chargers ICs applications.
- Golf carts
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
