FAN54013UCX Overview
In the Tape & Reel (TR) package, you will find it.To make it easier for you, it is included with the 20-UFBGA, WLCSP package.There is a mounting type of Surface Mount for this device.Keeping the temperature at -30°C~85°C TA will ensure reliable performance.SWITCHING REGULATOR is the analog IC used in this device.The device requires Constant - Programmable of current to charge.This part number FAN54013 can be used to find its related parts.In total, there are 20 terminations.Battery pack voltage is 4.5V Max.A number of programmable features are available, including Current, Timer, Voltage.In order for it to work, it requires 20 pins.A 5V battery should be sufficient.6V supply voltage is not a problem for it.The 1.8V output voltage allows for high efficiency.The device falls under the Power Management Circuits subcategory.Using a supply voltage as low as 4V will allow it to function.Aligning it with Surface Mount is required for mounting.In order to ensure optimum supply voltage, the maximum voltage setting is set to 0.3mA.The power supply for this part is set to 5V.Optimal efficiency requires a supply voltage of 6V.Voltage input can be as low as 20V volts at its maximum.The device can also generate the additional features of ALSO HAS A CONTROL TECHNIQUE OF PFM.The part's switching frequency is at most 3300kHz.Voltage 1.9V is the maximum output voltage needed for this operation.In order to comply with the constraints, the maximum output current is reduced to 1.45A.
FAN54013UCX Features
Battery pack voltage of 4.5V Max
Power Management Circuits subcategory
Addtional features of ALSO HAS A CONTROL TECHNIQUE OF PFM
20-UFBGA, WLCSP package
FAN54013UCX Applications
There are a lot of ON Semiconductor
FAN54013UCX Battery Chargers ICs applications.
- Fleet management
- Shop charger
- Golf carts
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
