CD4541BCMX Overview
A 14-SOIC (0.154, 3.90mm Width) box encloses the digital timer. Set the programmable timer's frequency to 100kHz.It is used to pack in Tape & Reel (TR) case. The recommended mounting type is Surface Mount.It is possible for the programmable timer to supply a voltage of 3V~15V that can be used to operate.The type of chips can be divided into Programmable Timer. The operating temperature of this timer clock is -55°C~125°C. To mount this digital timer with Surface Mount. The minimum operating temperature of the chip must not be lower than -55°C. It's best to use the timer clock when the temperature is below 125°C. It is based on 4541. The timer clock contains 14 pins. The minimum supply voltage of the chip must not be lower than 3V. The supply voltage of this chip should not exceed 15V. The timer clock runs quiescent current at 20μA. The number of Timers/Counters on the device is 1.
CD4541BCMX Features
Operate frequency at 100kHz
Package / Case: Tape & Reel (TR)
Mounting Type:Surface Mount
Max Operating temperature at -55°C
Quiescent Current at 20μA
1 Timers/Counters
CD4541BCMX Applications
There are a lot of ON Semiconductor CD4541BCMX Programmable Timers & Oscillators applications.
- Tamper Detection
- Battery Powered Systems
- Delay circuits
- Sensor Node
- Always On Systems
- Remote Sensors
- Energy Harvesting Systems
- Intruder Detection
- Consumer Electronics
- Watchdog Timers
