CAT811LTBI-T3 Overview
This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Packaged in a Cut Tape (CT)-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find TO-253-4, TO-253AA functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. A supply voltage of 5V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 4 pins. There are 4 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. Supplied with a operating current of 8μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using CAT811, the base power ics number. To operate this power management, you will need at least 5V volts of power.
CAT811LTBI-T3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
8μA operating supply current
CAT811LTBI-T3 Applications
There are a lot of ON Semiconductor CAT811LTBI-T3 Voltage Supervisors applications.
- Important electronics for automotive safety
- Analog circuit
- Display equipment
- Consumer electronics
- Battery cars
- Functional modules
- Telecommunications equipment
- Power distribution systems of infant care room
- Battery-powered equipment
- Fire equipment power monitoring system
