CAT803ZTBI-GT3 Overview
There are 3 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. There are a total of 1 channels on this supervisor, and they are arranged in a series. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 3 pins in it. 3 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 15μA. You can always use CAT803, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 2.5V power to work.
CAT803ZTBI-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
15μA operating supply current
CAT803ZTBI-GT3 Applications
There are a lot of ON Semiconductor CAT803ZTBI-GT3 Voltage Supervisors applications.
- Detection of phase imbalance
- Microprocessor system
- Personal computers
- Smart meter
- emergency room
- Leakage current detection
- Transformer load monitoring equipment
- Set top box
- Utility meter
- Sensitive sensors
