CAT803LTBI-GT3 Overview
A total of 3 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management conducts in a 5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 3 pins on IC management. There are 3 pins on the supervisor. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a supply current of 20μA for the power management. You can always use CAT803, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 5V volts to function properly.
CAT803LTBI-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
20μA operating supply current
CAT803LTBI-GT3 Applications
There are a lot of ON Semiconductor CAT803LTBI-GT3 Voltage Supervisors applications.
- Consumer electronics
- Automotive permanent magnet synchronous motors
- Kitchen appliances
- Satellite navigation
- Insulation fault location system
- WiFi router
- Radio
- Smartphones
- Detection of phase sequence
- Battery cars
