CAT1641WI-28-GT3 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management conducts in a 3.3V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. In total, the power management has 8 pins in it. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 3mA. In addition, IC management are other features such as [0], to mention only a few. It is always advisable to use CAT1641, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 3mA can be used.
CAT1641WI-28-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
3mA operating supply current
CAT1641WI-28-GT3 Applications
There are a lot of ON Semiconductor CAT1641WI-28-GT3 Voltage Supervisors applications.
- Power distribution systems of CCU
- Microcontroller system
- WiFi router
- Leakage protection
- Power distribution systems of operating room
- Transformer load monitoring equipment
- Detection of phase imbalance
- Refrigeration
- Radar
- Medical-specific isolation transformer
