CAT1640LI-25-G Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tube-packaging is used. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Through Hole. A total of 8 pins are located on this power management. There are 8 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 3V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Through Hole is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supervisor's supply current is specified to 3mA. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use CAT1640, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 3mA.
CAT1640LI-25-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
3mA operating supply current
CAT1640LI-25-G Applications
There are a lot of ON Semiconductor CAT1640LI-25-G Voltage Supervisors applications.
- Dash board
- Unattended substation automation
- Data storage applications
- Power communication system
- Military electronics
- Household appliances
- Consumer electronics
- Satellite navigation
- Refrigeration
- Sensitive sensors
