CAT140029LWI-GT3 Overview
Power management is mounted through 8 terminals. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a EEPROMs chip. 8 pins are present in total in this power management. Power managment ic pin count is 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.5V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 1mA volt supply current. You can always use CAT14002, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 3/5V power to work. The maximum supply temperature that PMIC chip can work with is 1mA.
CAT140029LWI-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.5V
1mA operating supply current
CAT140029LWI-GT3 Applications
There are a lot of ON Semiconductor CAT140029LWI-GT3 Voltage Supervisors applications.
- Unattended substation automation
- Electric heating appliances
- Detection of phase sequence
- Power communication system
- Low voltage/high power - AI, GPU
- Power distribution systems of infant care room
- Cloud computing
- FPGA design
- Power distribution systems of ICU
- Transformer load monitoring equipment
